| Vessel |
• Full volume: 7L
• Liquid volume: Max. 80%
• Design pressure: Max 0.15Mpa
• Glass vessel: high temperature resistant borosilicate glass
• Fermenter lid: AISI 316L with fine grinding and electrolytic polishing
• Fermenter lid inlets: Air inlet, four-in-one feed inlet, temperature tube, cooling coil, pH/DO electrode inlet, feed inlet, alternate inlet, off gas condenser(detachable), harvest tube, defoamer electrode port
|
| H-Mix® stirring system |
• Servo motor with high precision and low noise. Special mechanical seal
• RPM: 0~1000rpm ±1rpm
• Innovative no machine seal design, the first in the industry, for a cleaner and more hygienic stirring system
• It can be used without installation
• Smart-SC® intelligent smooth control, adjustable mixing parameters within a customizable time period
|
| Air inlet system |
• Air inlet: Air, quick disassembly structure
• Imported thermal mass flow meter
• Annular gas distributor, optional microporous bubble distributor
|
| pH |
• Range: 2.00~12.00pH, precision: ±0.02
• Sterilization temperature: 0~140°C
• Controller: HN-K integrated transmitter with filter, signal isolator and RS-485 communication
• Association setting: pH is automatically associated with acid-base pump, dead zone customization
• Smart-SC® intelligent smooth control, custom time period regulation of pH
|
| DO |
• Range: 0~100% O2 saturation, precision: ±0.1%
• Sterilization temperature: 0~140°C
• Controller: HN-K integrated transmitter with filter, signal isolator and RS-485 communication
• DO and stirring, replenishment multi-stage cascade regulation, to ensure sufficient gas output during the experiment
• Custom time period regulation of DO
|
| TEMP control system |
• Electric heating mode of thermal blanket and cooling water to dual temperature control
• 24V safe voltage
• Temperature control range: Cooling water+5°C~65°C ±0.1°C
• Temperature sensor: Imported PTI00 platinum electrode(quick disassembly resistant to high temperature)
|
| Cold Water Module |
• The cooling water system is controlled by the integrated controller, which communicates with the host PLC and the solenoid valve controls the on/off
• Cooling water connector adopts imported self-locking fast interface, the interface contains self-locking valve
• Temperature value can be adjusted as needed at any time
|
| Peristaltic pump |
• 4 channels peristaltic pump including FOAM / FEED / ACID / BASE
• High-precision Flip Pump with variable speed, quick connection
• Suitable for multiple sizes of silicone tubes, flow rate up to 326.55mL/min
• Peristaltic pump: Accumulated flow, instantaneous flow, speed adjustment, 100% adjustment, associated PID adjustment, manual control and other functions
• The new feed-sup® feed supplement system: support direct, timed, exponential and equation replenishment
• With Smart-SC® intelligent sequential control can be adjusted at any time according to the needs of the supplement parameters
|
| Defoaming system |
• Mechanical defoaming paddle with rake and compression
• Defoamer: Flow addition by peristaltic pump
• High-sensitive defoaming electrode
|
| Sampling |
• Sterile sampling system: autoclave sterilization
• Syringe negative pressure design: remove bacteria contamination during sampling
|
| Multi fermenters extension |
• Multiple system expansion of 2-8 fermenters
• Local HMI centralized control
• Multi-fermenters adopt network cable bus communication mode
|
| Controller HF-Control v2.2 control system |
• 10 inch HMI touch screen, brightness>350 cd/m2
• The second generation graphical interface makes the experiment parameters clear at a glance, realizes Data and information visualization, information charting, better human-computer interaction, and more convenient experiment operation
• Siemens SIMATIC – Smart Series processor
• Low voltage electrical appliances use Schneider and other international well-known brands
• HF-Control V2.2 embedded control software configuration for full local operation
• pH / DO / TEM / FOA can realize automatic and manual control
• Curve display, historical data records and USB export functions of RPM / pH / DO / TEM
• Meta-Tri® audit trail：Exclusive developed system can automatically store operation records. Experimental process can be tracked.
• Real-time protection of experimental data, advanced permissions can restrict export and deletion to prevent data breach.
• It can be used with the Analysis software HW-Analysis V1.0
• External OPC XML DA via Ethernet data communication
• Extensible: glass rotor flowmeter of 2~4channels, balance, external peristaltic pump, etc.
|
| Power |
• Input: AC110~240v/1.2kw
• Output: Motor, thermal blanket, peristaltic pump and other power parts use 24V safety voltage
|
